电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于组成要素的作战体系构建方法研究

针对当前作战体系构建理论研究中的若干问题,提出了基于组成要素的作战体系构建方法,对作战体系进行了模块分解和功能要求分析,得出了基于组成要素构建一般作战体系的框架图,可为同类作战体系构建提供参考。     

Determination of burn‐in parameters and residual life for highly reliable products

Today, many products are designed and manufactured to function for a long period of time before they fail. Determining product reliability is a great challenge to manufacturers of highly reliable products with only a relatively short period of time available for internal life testing. In particular, it may be difficult to determine optimal burn‐in parameters and characterize the residual life distribution. A promising alternative is to use data on a quality characteristic (QC) whose degradation over time can be related to product failure. Typically, product failure corresponds to the first passage time of the degradation path beyond a critical value. If degradation paths can be modeled properly, one can predict failure time and determine the life distribution without actually observing failures. In this paper, we first use a Wiener process to describe the continuous degradation path of the quality characteristic of the product. A Wiener process allows nonconstant variance and nonzero correlation among data collected at different time points. We propose a decision rule for classifying a unit as normal or weak, and give an economic model for determining the optimal termination time and other parameters of a burn‐in test. Next, we propose a method for assessing the product's lifetime distribution of the passed units. The proposed methodologies are all based only on the product's initial observed degradation data. Finally, an example of an electronic product, namely contact image scanner (CIS), is used to illustrate the proposed procedure. © 2002 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

使用双水压传感器抗风浪干扰原理

提出了在水雷上使用双水压传感器的设想.传统水雷只使用一个水压传感器,提供的信号信息稍嫌不足,给水压引信抗风浪干扰带来了限制.通过使用两个传感器,利用海浪水压场传播时在两个传感器上的时延信息,使用抵消方法压制海浪水压信号.初步分析表明,使用双传感器可以使水压引信抵抗一定的海浪水压信号的干扰.     

改进的Euler方法应用于非线性方程求根

本文通过引入动力系统，将改进的Euler方法应用于非线性方程求根问题，给出非线性方程求根的预估-再校正迭代格式，证明了该格式至少二阶收敛并可以调节参数达到超收敛。最后给出数值实验，数值结果验证了算法的有效性。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

过渡流区圆柱体驻点热流的工程计算

以流动分区的界限为Knudsen数的变化区间,使用线性插值和调节参数进行校正的方法,提出一种计算过渡流区热流的桥函数形式,并且确定了端面迎风的圆柱体的调节参数.使用DSMC方法对计算结果进行验证并与其他形式的桥函数进行比较.结果表明该桥函数在马赫数大于10的情况下,能比较准确地计算驻点热流的值,可以为飞行器初步设计提供一定的参考依据.     

高精度有限体积格式在三维曲线坐标系下的应用

为了构造在光滑区具有较高分辨率并且可以无振荡捕捉激波的高精度有限体积格式,同时降低格式在模板选择上遇到的困难,基于逐维重构方法,发展了结构网格下的高精度有限体积格式,并将这一格式推广到三维曲线坐标系下,从而可以适应相对复杂外形下的计算。为充分验证格式的有效性,选取一系列典型算例进行计算:在等熵涡输运和二维喷管流动中验证了格式的精度可以达到设计精度;在双马赫反射问题中格式也表现出良好的捕捉激波的能力。数值计算表明,上述格式在曲线网格上具有较高的数值精度和鲁棒的激波捕捉能力,适用于流体力学方程的计算。     

基于ADC方法的复杂武器系统效能评估方法

ADC方法是武器装备效能评估的重要方法之一。传统ADC方法一般将武器系统各个分系统简化为串联系统计算。针对复杂武器系统中各个分系统组成繁多、串并联关系复杂、对作战影响程度不一等特点,对ADC方法进行了优化,使得ADC方法可以针对多并联系统更客观地评估。通过某型武器装备的实际验证,改进后的ADC方法合理可行,可以对复杂武器系统拥有更客观和更全面地评价,可作为其他复杂武器系统效能评估方法的参考。